Pilz Single/Dual-Channel Speed/Standstill Monitoring Safety Relay, 24 → 240V ac/dc, 2 Safety Contacts

RS Stock No.: 489-6394Brand: PilzManufacturers Part No.: 777949
brand-logo
View all in Safety Relays

Technical Document

Specifications

Brand

Pilz

Supply Voltage

24 → 240V ac/dc

Number of Channels

1, 2

Safety Contacts

2

Function

Speed/Standstill Monitoring

Auxiliary Contacts

1

Range

PNOZ X

Safety Category ISO 13849-1

3

Safety Category (ISO 13849-1)

3

PL ISO 13849-1

e

PL (ISO 13849-1)

e

SIL IEC 61508

3

SIL (IEC 61508)

3

Terminal Type

Screw

Series

PSWZ X1P

Width

45mm

Depth

121mm

Performance Level

e

Length

94mm

Country of Origin

France

Product details

PSWZX1P Safety Relay by PILZ

The PSWZX1P range of safety relays from PILZ offers you safety and performance all in one. The PSWZX1P offers you different modes of operation such as single or dual channel switches. Suitable specifically for operating your safe standstill machinery or tools that are deemed dangerous or hazardous to health.

Features and benefits:

• DIN rail mounted with screw terminals
• LED display that offers you the following measures:
- Supply voltages
- Standstill on Channel 1 / 2
- Switch status
- Fault signal if simultaneity time is exceeded

• Semiconductor output signal (input for reset function):
- Error
- Switch status

• Measure inputs for single or three-phase motors
• Measuring voltage is selectable
• Feedback loop is in operation
• Plug in connection terminals is possible

Safety features:

• Relays K1 & K2 are interlocked specifically designed so that the unit cannot be switched back on in the case of contact welding or an open circuit (ensuring your safety at all times)
• The unit will monitor and measure and look out for an open circuit. If the circuit does open, the unit will immediately switch itself off to prevent hazards
• The standstill motor which is unique to the PSWZ X1P prevents the plant from being enabled, in the following cases:
- Power supply failure
- Component failure
- Measuring circuits are open circuit
- Coil deflect / open circuit

Applications:

Safe standstill monitoring – this is the units main purpose and is specifically designed for safe standstill where areas of operation such as plants have dangerous machinery or tools in use. Safe standstill monitoring is only detected on power free measuring circuits. Any residual voltages, induced voltages or drives with in the position control will prevent the relay from its main function so take this into consideration when in use

Technical safety parameters:

Approvals

BG, UL, CUL

Standards

VDE 0113; EN 60204-1; IEC 204-1

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

€ 773.65

Each (ex VAT)

€ 920.64

Each (inc VAT)

Pilz Single/Dual-Channel Speed/Standstill Monitoring Safety Relay, 24 → 240V ac/dc, 2 Safety Contacts

€ 773.65

Each (ex VAT)

€ 920.64

Each (inc VAT)

Pilz Single/Dual-Channel Speed/Standstill Monitoring Safety Relay, 24 → 240V ac/dc, 2 Safety Contacts
Stock information temporarily unavailable.

Technical Document

Specifications

Brand

Pilz

Supply Voltage

24 → 240V ac/dc

Number of Channels

1, 2

Safety Contacts

2

Function

Speed/Standstill Monitoring

Auxiliary Contacts

1

Range

PNOZ X

Safety Category ISO 13849-1

3

Safety Category (ISO 13849-1)

3

PL ISO 13849-1

e

PL (ISO 13849-1)

e

SIL IEC 61508

3

SIL (IEC 61508)

3

Terminal Type

Screw

Series

PSWZ X1P

Width

45mm

Depth

121mm

Performance Level

e

Length

94mm

Country of Origin

France

Product details

PSWZX1P Safety Relay by PILZ

The PSWZX1P range of safety relays from PILZ offers you safety and performance all in one. The PSWZX1P offers you different modes of operation such as single or dual channel switches. Suitable specifically for operating your safe standstill machinery or tools that are deemed dangerous or hazardous to health.

Features and benefits:

• DIN rail mounted with screw terminals
• LED display that offers you the following measures:
- Supply voltages
- Standstill on Channel 1 / 2
- Switch status
- Fault signal if simultaneity time is exceeded

• Semiconductor output signal (input for reset function):
- Error
- Switch status

• Measure inputs for single or three-phase motors
• Measuring voltage is selectable
• Feedback loop is in operation
• Plug in connection terminals is possible

Safety features:

• Relays K1 & K2 are interlocked specifically designed so that the unit cannot be switched back on in the case of contact welding or an open circuit (ensuring your safety at all times)
• The unit will monitor and measure and look out for an open circuit. If the circuit does open, the unit will immediately switch itself off to prevent hazards
• The standstill motor which is unique to the PSWZ X1P prevents the plant from being enabled, in the following cases:
- Power supply failure
- Component failure
- Measuring circuits are open circuit
- Coil deflect / open circuit

Applications:

Safe standstill monitoring – this is the units main purpose and is specifically designed for safe standstill where areas of operation such as plants have dangerous machinery or tools in use. Safe standstill monitoring is only detected on power free measuring circuits. Any residual voltages, induced voltages or drives with in the position control will prevent the relay from its main function so take this into consideration when in use

Technical safety parameters:

Approvals

BG, UL, CUL

Standards

VDE 0113; EN 60204-1; IEC 204-1