Technical Document
Specifications
Transmitter Signal Type
Single Ended
Receiver Signal Type
Single Ended
Power Supply Type
Single
Number of Transceivers
2 (RS232)
Minimum Operating Temperature
-40 °C
Number of Drivers per Line
2 (RS232)
Number of Receivers
2 (RS232)
Number of Transmitters
2 (RS232)
Number of Receivers per Line
2 (RS232)
Maximum Operating Temperature
+85 °C
Mounting Type
Surface Mount
Pin Count
32
Data Rate
10Mbps
Interface Standards
RS-232
Height
2.8mm
Typical Single Supply Voltage
5 V
Width
11.25mm
Length
15mm
Package Type
LGA
Brand
Linear TechnologyDimensions
15 x 11.25 x 2.8mm
Product details
Fluke 116 / 62 MAX+ Combo Kit for Technicans
For the complete solution to HVAC troubleshooting the extra value-packed HVAC Technicians Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.
Fluke116 Digital Multimeter Key Features
Fluke 116 HVAC Multimeter with Temperature and Microamps to test flame sensors
TL175 Hard Point Test Lead Set
TPak ToolPak Magnetic Meter Hanging Strap
Flexible Cuff Pipe clamp Thermocouple
80BK Integrated Temperature Probe
80AK-AThermocouple Adapter
C115 Deluxe soft carrying case with shoulder strap
Low input impedance helps prevent false readings due to ghost voltage
Work in poorly lit areas with the Large white LED backlit display
True-rms voltage and current for accurate measurements on non-linear loads
Measures 10 A directly (20 A overload for 30-seconds) without a current clamp
Resistance, continuity, frequency and capacitance
Record signal fluctuations using Min/Max/Average and elapsed time stamps
CAT III 600 V safety rated
Fluke 62 MAX+ Infrared Thermometer Key Features
Dust and water-resistant: IP54 rated
Rugged: 3-meter (9.8-foot) drop tested
Ergonomically designed: Completely redesigned for a more natural hand fit
Distance to spot: 12:1
Dual lasers: Identifies area to be measured
Large, backlit display: Makes data easier to read, even in dark areas
Measure -30 °C to 650 °C (-22 °F to 1202 °F)
Extremely accurate
Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box
Fluke C115 Soft Case
Lightweight soft case to provide optimal protection and accessory storage
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Transmitter Signal Type
Single Ended
Receiver Signal Type
Single Ended
Power Supply Type
Single
Number of Transceivers
2 (RS232)
Minimum Operating Temperature
-40 °C
Number of Drivers per Line
2 (RS232)
Number of Receivers
2 (RS232)
Number of Transmitters
2 (RS232)
Number of Receivers per Line
2 (RS232)
Maximum Operating Temperature
+85 °C
Mounting Type
Surface Mount
Pin Count
32
Data Rate
10Mbps
Interface Standards
RS-232
Height
2.8mm
Typical Single Supply Voltage
5 V
Width
11.25mm
Length
15mm
Package Type
LGA
Brand
Linear TechnologyDimensions
15 x 11.25 x 2.8mm
Product details
Fluke 116 / 62 MAX+ Combo Kit for Technicans
For the complete solution to HVAC troubleshooting the extra value-packed HVAC Technicians Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.
Fluke116 Digital Multimeter Key Features
Fluke 116 HVAC Multimeter with Temperature and Microamps to test flame sensors
TL175 Hard Point Test Lead Set
TPak ToolPak Magnetic Meter Hanging Strap
Flexible Cuff Pipe clamp Thermocouple
80BK Integrated Temperature Probe
80AK-AThermocouple Adapter
C115 Deluxe soft carrying case with shoulder strap
Low input impedance helps prevent false readings due to ghost voltage
Work in poorly lit areas with the Large white LED backlit display
True-rms voltage and current for accurate measurements on non-linear loads
Measures 10 A directly (20 A overload for 30-seconds) without a current clamp
Resistance, continuity, frequency and capacitance
Record signal fluctuations using Min/Max/Average and elapsed time stamps
CAT III 600 V safety rated
Fluke 62 MAX+ Infrared Thermometer Key Features
Dust and water-resistant: IP54 rated
Rugged: 3-meter (9.8-foot) drop tested
Ergonomically designed: Completely redesigned for a more natural hand fit
Distance to spot: 12:1
Dual lasers: Identifies area to be measured
Large, backlit display: Makes data easier to read, even in dark areas
Measure -30 °C to 650 °C (-22 °F to 1202 °F)
Extremely accurate
Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box
Fluke C115 Soft Case
Lightweight soft case to provide optimal protection and accessory storage