Technical Document
Specifications
Gender
Female
Viewing Area Dimensions
149 x 30mm
Impedance
50Ω
Bulkhead
Yes
Body Orientation
Right Angle
Minimum Operating Temperature
-55°C
Contact Material
Beryllium Copper
Body Plating
Nickel
Maximum Operating Temperature
+85°C
Operating Frequency
0 to 4GHz
Contact Plating
Gold
Mounting Type
PCB Mount
Termination Method
Through Hole
Brand
TE ConnectivityCountry of Origin
United States
Product details
Lithium-Ion Linear Battery Charger with LDO Regulator, STMicroelectronics
The STEVAL-ISB032V1 is an Evaluation Board based on the STNS01. It is a linear battery charger for single-cell Li-Ion batteries integrating an LDO regulator and several battery protection functions. The input supply voltage is normally used to charge the battery and provide power to the LDO regulator. When a valid input voltage is not present and the battery is not empty, the device automatically switches to battery power. When shutdown mode is activated, the battery power consumption is reduced to less than 500nA to maximize battery life during shelf time.
Charges single-cell Li-Ion batteries with CC-CV algorithm and charge termination
Charge current programmable up to 400mA
1% accuracy on floating voltage (4.2V)
Integrated 3.1V LDO (Low Drop-Out) regulator
Automatic power path management
Battery over-charge, over-discharge, over-current protection
Charging timeout
Very low battery leakage in over-discharge/shutdown mode
Low quiescent current
Charge/fault status output
Charger enable input
Battery Charging & Monitoring, STMicroelectronics
Stock information temporarily unavailable.
Please check again later.
P.O.A.
28
![sticker-729](https://cms.rsdelivers.com/repository-v1/Cyprus Label.jpg)
P.O.A.
28
![sticker-729](https://cms.rsdelivers.com/repository-v1/Cyprus Label.jpg)
Technical Document
Specifications
Gender
Female
Viewing Area Dimensions
149 x 30mm
Impedance
50Ω
Bulkhead
Yes
Body Orientation
Right Angle
Minimum Operating Temperature
-55°C
Contact Material
Beryllium Copper
Body Plating
Nickel
Maximum Operating Temperature
+85°C
Operating Frequency
0 to 4GHz
Contact Plating
Gold
Mounting Type
PCB Mount
Termination Method
Through Hole
Brand
TE ConnectivityCountry of Origin
United States
Product details
Lithium-Ion Linear Battery Charger with LDO Regulator, STMicroelectronics
The STEVAL-ISB032V1 is an Evaluation Board based on the STNS01. It is a linear battery charger for single-cell Li-Ion batteries integrating an LDO regulator and several battery protection functions. The input supply voltage is normally used to charge the battery and provide power to the LDO regulator. When a valid input voltage is not present and the battery is not empty, the device automatically switches to battery power. When shutdown mode is activated, the battery power consumption is reduced to less than 500nA to maximize battery life during shelf time.
Charges single-cell Li-Ion batteries with CC-CV algorithm and charge termination
Charge current programmable up to 400mA
1% accuracy on floating voltage (4.2V)
Integrated 3.1V LDO (Low Drop-Out) regulator
Automatic power path management
Battery over-charge, over-discharge, over-current protection
Charging timeout
Very low battery leakage in over-discharge/shutdown mode
Low quiescent current
Charge/fault status output
Charger enable input