Tedea Huntleigh Single Point Load Cell, 500kg Range, Compression, Tension Measure
Technical Document
Specifications
Brand
Tedea HuntleighForce Measured
Compression, Tension
Force/ Load Measurement Range
500kg
Sensor Type
Single Point
Terminal Type
Wire Lead
IP Rating
IP67
Housing Material
Stainless Steel
Length
80mm
Depth
26mm
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+40°C
Dimensions
62.1 mm
Country of Origin
China
Product details
Tedea Huntleigh Compression & Tension Load Cell "S" Beam Type 200/300kg
Features and Benefits:
Output impendence 350Ω
Input Impedance 400 ±20Ω
Safe overload 150% rated capacity
Ultimate overload 300% rated capacity
For use in tension and compression
6 wire (sense) circuit
Bridge signal conditioners available separately
For Output signal conditioners see stock no. 470-272
Dimensions 62 x 80 x 18mm
The additional sense wires compensate for changes in lead resistance due to temperature changes and/or cable extension.
Typical Applications:
Force measurement,
material testing machines,
conversion of mechanical scales to electronic,
hanging scales, hoppers
FAQs:
What thread does it have?
This is 1/2 Inch UNF
Stock information temporarily unavailable.
Please check again later.
€ 419.96
Each (ex VAT)
€ 499.75
Each (inc. VAT)
1
€ 419.96
Each (ex VAT)
€ 499.75
Each (inc. VAT)
1
Technical Document
Specifications
Brand
Tedea HuntleighForce Measured
Compression, Tension
Force/ Load Measurement Range
500kg
Sensor Type
Single Point
Terminal Type
Wire Lead
IP Rating
IP67
Housing Material
Stainless Steel
Length
80mm
Depth
26mm
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+40°C
Dimensions
62.1 mm
Country of Origin
China
Product details
Tedea Huntleigh Compression & Tension Load Cell "S" Beam Type 200/300kg
Features and Benefits:
Output impendence 350Ω
Input Impedance 400 ±20Ω
Safe overload 150% rated capacity
Ultimate overload 300% rated capacity
For use in tension and compression
6 wire (sense) circuit
Bridge signal conditioners available separately
For Output signal conditioners see stock no. 470-272
Dimensions 62 x 80 x 18mm
The additional sense wires compensate for changes in lead resistance due to temperature changes and/or cable extension.
Typical Applications:
Force measurement,
material testing machines,
conversion of mechanical scales to electronic,
hanging scales, hoppers
FAQs:
What thread does it have?
This is 1/2 Inch UNF