Pepperl + Fuchs Retroreflective Photoelectric Sensor, Block Sensor, 4.2 m Detection Range
Technical Document
Specifications
Brand
Pepperl + FuchsSensor Style
Block
Detection Type
Retroreflective
Detection Range
4.2 m
Output Type
PUSH/PULL
Electrical Connection
M12 5 pin Connector
Maximum dc Voltage
30V
Light Source
LED
IP Rating
IP67
Maximum Current
200 mA
Response Time
500 μs
Housing Material
Nickel Plated Die Cast Zinc
Minimum Operating Temperature
-40°C
Series
MLV12
Maximum Operating Temperature
+60°C
Country of Origin
Singapore
Product details
Retro-Reflective - LED
Automatic adjustment of the switch points ’sensitivity’ through “TEACH IN”
Sensitivity adjustment via membrane keypad or optical interface (e.g. freely selectable time steps)
Multifunction input
Control test input
Multifunction Timer
Failure warning, indication and output (static, dynamic)
Voltage supply: 10 → 30Vdc
M12, 5 pin connector
Flashing power on LED in case of short-circuit
Multiple device installation possible, no mutual interference
Ultra bright LEDs for power on, stability control and switching state
Powerful push-pull output - 200 mA for high resistance against noise
Protection class II
Not sensitive to ambient light, even with switched energy saving lamps
Temperature range: -40 → +60°C
€ 510.44
€ 510.44 Each (ex VAT)
€ 607.42
€ 607.42 Each (inc. VAT)
1
€ 510.44
€ 510.44 Each (ex VAT)
€ 607.42
€ 607.42 Each (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
Technical Document
Specifications
Brand
Pepperl + FuchsSensor Style
Block
Detection Type
Retroreflective
Detection Range
4.2 m
Output Type
PUSH/PULL
Electrical Connection
M12 5 pin Connector
Maximum dc Voltage
30V
Light Source
LED
IP Rating
IP67
Maximum Current
200 mA
Response Time
500 μs
Housing Material
Nickel Plated Die Cast Zinc
Minimum Operating Temperature
-40°C
Series
MLV12
Maximum Operating Temperature
+60°C
Country of Origin
Singapore
Product details
Retro-Reflective - LED
Automatic adjustment of the switch points ’sensitivity’ through “TEACH IN”
Sensitivity adjustment via membrane keypad or optical interface (e.g. freely selectable time steps)
Multifunction input
Control test input
Multifunction Timer
Failure warning, indication and output (static, dynamic)
Voltage supply: 10 → 30Vdc
M12, 5 pin connector
Flashing power on LED in case of short-circuit
Multiple device installation possible, no mutual interference
Ultra bright LEDs for power on, stability control and switching state
Powerful push-pull output - 200 mA for high resistance against noise
Protection class II
Not sensitive to ambient light, even with switched energy saving lamps
Temperature range: -40 → +60°C