Technical Document
Specifications
Brand
FTDI ChipBoard Level Components
Y
Product details
FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.
- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.
Stock information temporarily unavailable.
Please check again later.
€ 3.35
Each (Supplied on a Reel) (ex VAT)
€ 3.986
Each (Supplied on a Reel) (inc VAT)
2
€ 3.35
Each (Supplied on a Reel) (ex VAT)
€ 3.986
Each (Supplied on a Reel) (inc VAT)
2
Buy in bulk
quantity | Unit price | Per Reel |
---|---|---|
2 - 8 | € 3.35 | € 6.70 |
10 - 38 | € 3.00 | € 6.00 |
40 - 98 | € 2.82 | € 5.64 |
100 - 198 | € 2.77 | € 5.54 |
200+ | € 2.75 | € 5.50 |
Technical Document
Specifications
Brand
FTDI ChipBoard Level Components
Y
Product details
FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.
- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.