Technical Documents
Specifications
Brand
FlukeProduct Type
Current Probe
Maximum AC Current
3kA
Accuracy
±1 %
Maximum Conductor Size
914mm
Cable Length
2m
Output Type
Current
Connector Type
BNC
Battery Type
2 x AA
Minimum Operating Temperature
-20°C
Battery Life
400h
Maximum Operating Temperature
90°C
Model Number
i3000S
Standards/Approvals
EN 61326
Safety Category Level
CAT III
Safety Category Voltage
600V
Country of Origin
China
Product Details
This current probe is a flexible Rogowski-coil clamp designed to measure alternating currents in conjunction with oscilloscopes, recorders or data loggers. It is intended for use in confined or hard-to-reach locations and connects to instruments via a BNC output for straightforward waveform capture and analysis.
The measuring head accepts conductors up to 178mm in diameter, allowing measurement around large cables and busbars.
The head tolerates up to +90 °C while the electronics operate to +85 °C, permitting use close to heat-generating equipment if placed accordingly.
It meets Category III at 600 V, restricting use on uninsulated conductors to that voltage and to frequencies below 1 kHz.
External fields beyond 200mm from the head contribute approximately ±1% of range, and nearby wires over 200mm away show minimal influence.
The probe supplies a BNC output and is supplied with a BNC-to-banana safety plug adapter for connection to a variety of test equipment.
2 AA batteries, BNC adaptor/male 4 mm plug and user manual.
Stock information temporarily unavailable.
€ 1,641.72
€ 1,641.72 Each (ex VAT)
€ 1,953.65
€ 1,953.65 Each (inc. VAT)
1
€ 1,641.72
€ 1,641.72 Each (ex VAT)
€ 1,953.65
€ 1,953.65 Each (inc. VAT)
Stock information temporarily unavailable.
1
Technical Documents
Specifications
Brand
FlukeProduct Type
Current Probe
Maximum AC Current
3kA
Accuracy
±1 %
Maximum Conductor Size
914mm
Cable Length
2m
Output Type
Current
Connector Type
BNC
Battery Type
2 x AA
Minimum Operating Temperature
-20°C
Battery Life
400h
Maximum Operating Temperature
90°C
Model Number
i3000S
Standards/Approvals
EN 61326
Safety Category Level
CAT III
Safety Category Voltage
600V
Country of Origin
China
Product Details
This current probe is a flexible Rogowski-coil clamp designed to measure alternating currents in conjunction with oscilloscopes, recorders or data loggers. It is intended for use in confined or hard-to-reach locations and connects to instruments via a BNC output for straightforward waveform capture and analysis.
The measuring head accepts conductors up to 178mm in diameter, allowing measurement around large cables and busbars.
The head tolerates up to +90 °C while the electronics operate to +85 °C, permitting use close to heat-generating equipment if placed accordingly.
It meets Category III at 600 V, restricting use on uninsulated conductors to that voltage and to frequencies below 1 kHz.
External fields beyond 200mm from the head contribute approximately ±1% of range, and nearby wires over 200mm away show minimal influence.
The probe supplies a BNC output and is supplied with a BNC-to-banana safety plug adapter for connection to a variety of test equipment.
2 AA batteries, BNC adaptor/male 4 mm plug and user manual.
