Microchip MCP1640 12V/50mA Two Cells Boost Converter for MCP1640

RS Stock No.: 749-6455Brand: MicrochipManufacturers Part No.: ARD00386
brand-logo

Technical Document

Specifications

Power Management Function

Boost Converter

Kit Classification

Reference Design

Featured Device

MCP1640

Kit Name

MCP1640 12V/50mA Two Cells

Product details

MCP1640 DC-DC Boost Converter Ref Design

The MCP1640 12V/50mA Two Cells Input Boost Converter Reference Design is designed to demonstrate the MCP1640 device’s high-voltage boost capability above its typical output range of 5.5V. This board boosts the low-voltage input to 12V and up to 70mA load. By changing specific resistors, a lower/higher output than 12V can be obtained. The MCP1640 Input Boost Converter was developed to help engineers reduce product design cycle time. At 2.0V input and 12V output the board is capable of a maximum of 50mA load current.

Input voltage: Two Alkaline or Lithium Cells, 2.0-3.0V typical
Supports extended input range of 2.0-5.0V
Output: 12V/50mA typical @ 2.0V input
Output: 12V/70mA @ 3.3V input
No-load input current: 0.2 mA @ 3.0V input
Efficiency: Up to 75%
PWM operation at 500kHz

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Microchip MCP1640 12V/50mA Two Cells Boost Converter for MCP1640

P.O.A.

Microchip MCP1640 12V/50mA Two Cells Boost Converter for MCP1640
Stock information temporarily unavailable.

Technical Document

Specifications

Power Management Function

Boost Converter

Kit Classification

Reference Design

Featured Device

MCP1640

Kit Name

MCP1640 12V/50mA Two Cells

Product details

MCP1640 DC-DC Boost Converter Ref Design

The MCP1640 12V/50mA Two Cells Input Boost Converter Reference Design is designed to demonstrate the MCP1640 device’s high-voltage boost capability above its typical output range of 5.5V. This board boosts the low-voltage input to 12V and up to 70mA load. By changing specific resistors, a lower/higher output than 12V can be obtained. The MCP1640 Input Boost Converter was developed to help engineers reduce product design cycle time. At 2.0V input and 12V output the board is capable of a maximum of 50mA load current.

Input voltage: Two Alkaline or Lithium Cells, 2.0-3.0V typical
Supports extended input range of 2.0-5.0V
Output: 12V/50mA typical @ 2.0V input
Output: 12V/70mA @ 3.3V input
No-load input current: 0.2 mA @ 3.0V input
Efficiency: Up to 75%
PWM operation at 500kHz