Power Integrations, AC/DC Converter 2.5 A, 12 V 6-Pin, eSIP-7C
Technical Document
Specifications
Brand
Power IntegrationsMaximum Input Voltage
265V ac
Product Type
AC/DC Converter
Maximum Output Voltage
12V
Mount Type
Through Hole
Output Power
15W
Pin Count
6
Switching Frequency
32kHz
Maximum Output Current
2.5A
Package Type
eSIP-7C
Minimum Input Voltage
85V ac
Topology
Flyback
Maximum Duty Cycle
66%
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Width
2.06 mm
Series
LinkSwitch-HP
Height
8.25mm
Length
10.24mm
Standards/Approvals
No
Supply Current
1.3mA
Automotive Standard
No
Product details
LinkSwitch-HP series Offline AC-DC Converters
The Power Integrations LinkSwitch-HP family of flyback power supply ICs incorporate a primary side regulated controller and high-voltage power MOSFET in a single package. These devices feature ±5% CV accuracy, selectable current limit, programmable latching or hysteretic over-voltage, under-voltage and over-temperature protection, fast AC reset, and programmable shutdown delay time.
Package options:
• eSIP-7C package for vertical orientation with minimum PCB footprint size and simple heat sink mounting using clip or adhesive pad
• eSOP-12B package for low-profile surface mounted ultra-thin designs with heat transfer to PCB via exposed pad and SOURCE pins; both wave and IR reflow soldering supported
• eDIP-12B package for low-profile through-hole mounted ultra-thin designs with heat transfer to PCB via exposed pad or optional metal heat sink
• Multi-mode control maximizes efficiency over full load range
• No-load consumption below 30 mW at 230 VAC
• >75% efficiency with 1 W input at 230 VAC
• >50% efficiency with 0.1 W input at 230 VAC
• Dramatically simplifies power supply designs
• Eliminates opto-coupler and all secondary control circuitry
• ±5% or better output voltage tolerance
• 132 kHz operation reduces transformer and power supply size
• Compensation over line limits overload power
• Frequency jittering reduces EMI filter cost
• Fully integrated soft-start for minimum start-up stress
• Auto-restart limits power delivery to 3% during overload faults
AC-DC Converters, Power Integrations
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Stock information temporarily unavailable.
€ 34.50
€ 1.38 Each (Supplied in a Tube) (ex VAT)
€ 41.06
€ 1.642 Each (Supplied in a Tube) (inc. VAT)
Production pack (Tube)
25
€ 34.50
€ 1.38 Each (Supplied in a Tube) (ex VAT)
€ 41.06
€ 1.642 Each (Supplied in a Tube) (inc. VAT)
Stock information temporarily unavailable.
Production pack (Tube)
25
| quantity | Unit price | Per Tube |
|---|---|---|
| 25 - 95 | € 1.38 | € 6.90 |
| 100 - 245 | € 1.36 | € 6.80 |
| 250 - 495 | € 1.36 | € 6.80 |
| 500+ | € 1.33 | € 6.65 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Technical Document
Specifications
Brand
Power IntegrationsMaximum Input Voltage
265V ac
Product Type
AC/DC Converter
Maximum Output Voltage
12V
Mount Type
Through Hole
Output Power
15W
Pin Count
6
Switching Frequency
32kHz
Maximum Output Current
2.5A
Package Type
eSIP-7C
Minimum Input Voltage
85V ac
Topology
Flyback
Maximum Duty Cycle
66%
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Width
2.06 mm
Series
LinkSwitch-HP
Height
8.25mm
Length
10.24mm
Standards/Approvals
No
Supply Current
1.3mA
Automotive Standard
No
Product details
LinkSwitch-HP series Offline AC-DC Converters
The Power Integrations LinkSwitch-HP family of flyback power supply ICs incorporate a primary side regulated controller and high-voltage power MOSFET in a single package. These devices feature ±5% CV accuracy, selectable current limit, programmable latching or hysteretic over-voltage, under-voltage and over-temperature protection, fast AC reset, and programmable shutdown delay time.
Package options:
• eSIP-7C package for vertical orientation with minimum PCB footprint size and simple heat sink mounting using clip or adhesive pad
• eSOP-12B package for low-profile surface mounted ultra-thin designs with heat transfer to PCB via exposed pad and SOURCE pins; both wave and IR reflow soldering supported
• eDIP-12B package for low-profile through-hole mounted ultra-thin designs with heat transfer to PCB via exposed pad or optional metal heat sink
• Multi-mode control maximizes efficiency over full load range
• No-load consumption below 30 mW at 230 VAC
• >75% efficiency with 1 W input at 230 VAC
• >50% efficiency with 0.1 W input at 230 VAC
• Dramatically simplifies power supply designs
• Eliminates opto-coupler and all secondary control circuitry
• ±5% or better output voltage tolerance
• 132 kHz operation reduces transformer and power supply size
• Compensation over line limits overload power
• Frequency jittering reduces EMI filter cost
• Fully integrated soft-start for minimum start-up stress
• Auto-restart limits power delivery to 3% during overload faults
AC-DC Converters, Power Integrations
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products