RS PRO White PTFE Tape, 5m x 12mm x 0.2mm
Technical Document
Specifications
Brand
RS ProWidth
12mm
Thickness
0.2mm
Length
5m
Colour
White
Minimum Operating Temperature
-200°C
Maximum Operating Temperature
+260°C
Country of Origin
Netherlands
Product details
RS PRO PTFE Extra Thick PTFE Tape
This exceptional RS PRO Extra thick PTFE thread seal tape is also called plumbers tape or thread seal tape and is often used piping and ductwork application for sealing threaded pipe joints. Its non-adhesive backing makes it easy to handle, and the extra thick tape allows for a smaller overlap. The tape is sold cut to specific widths and wound on a spool which makes it easy to wind around your pipe threads.
Some of PTFEs key material characteristics are the fact that its both extremely low friction, and is hydrophobic (meaning it repels water). This makes PTFE tape incredibly useful for a wide range of plumbing and pipework jobs with pipe fittings etc.
Features and Benefits
Extra thick PTFE tape designed for sealing threads in just one wrap
Only requires 50% overlap on the thread for BS21 thread up to 2 inches.
Suitable for more aggressive environments where acids, gases or solvents may be present
Easy to apply and handle
Robust pressure resistant
FAQ's
Where would you use RS PRO PTFE tape?
The RS PRO PTFE tape can be used when fitting compression joints and is widely used by plumbers and DIY enthusiasts on radiator valves and taps.
How much PTFE tape to use?
To create a good seal wrap the tape it only requires a 50% overlap round the components to create a better seal.
How to use RS PRO PTFE Tape?
Always clean the thread pipes before beginning to apply your tape
Wrap the tape in the direction of the threaded spiral of the male thread, always beginning with the first thread. Wrapping the wrong way may result in it coming unwound as you tighten the fitting. Do not overhang the tape
Keep the edge of the tape parallel to the face of the fitting and wrap all the threads
When you have wrapped enough tape around, cut or tear off the excess
Press firmly to ensure the tape lies flat
Tighten the male end connection into the female end connection
Stock information temporarily unavailable.
Please check again later.
€ 3.65
Each (ex VAT)
€ 4.34
Each (inc. VAT)
1
€ 3.65
Each (ex VAT)
€ 4.34
Each (inc. VAT)
1
Buy in bulk
quantity | Unit price |
---|---|
1 - 5 | € 3.65 |
6 - 14 | € 3.50 |
15+ | € 3.45 |
Technical Document
Specifications
Brand
RS ProWidth
12mm
Thickness
0.2mm
Length
5m
Colour
White
Minimum Operating Temperature
-200°C
Maximum Operating Temperature
+260°C
Country of Origin
Netherlands
Product details
RS PRO PTFE Extra Thick PTFE Tape
This exceptional RS PRO Extra thick PTFE thread seal tape is also called plumbers tape or thread seal tape and is often used piping and ductwork application for sealing threaded pipe joints. Its non-adhesive backing makes it easy to handle, and the extra thick tape allows for a smaller overlap. The tape is sold cut to specific widths and wound on a spool which makes it easy to wind around your pipe threads.
Some of PTFEs key material characteristics are the fact that its both extremely low friction, and is hydrophobic (meaning it repels water). This makes PTFE tape incredibly useful for a wide range of plumbing and pipework jobs with pipe fittings etc.
Features and Benefits
Extra thick PTFE tape designed for sealing threads in just one wrap
Only requires 50% overlap on the thread for BS21 thread up to 2 inches.
Suitable for more aggressive environments where acids, gases or solvents may be present
Easy to apply and handle
Robust pressure resistant
FAQ's
Where would you use RS PRO PTFE tape?
The RS PRO PTFE tape can be used when fitting compression joints and is widely used by plumbers and DIY enthusiasts on radiator valves and taps.
How much PTFE tape to use?
To create a good seal wrap the tape it only requires a 50% overlap round the components to create a better seal.
How to use RS PRO PTFE Tape?
Always clean the thread pipes before beginning to apply your tape
Wrap the tape in the direction of the threaded spiral of the male thread, always beginning with the first thread. Wrapping the wrong way may result in it coming unwound as you tighten the fitting. Do not overhang the tape
Keep the edge of the tape parallel to the face of the fitting and wrap all the threads
When you have wrapped enough tape around, cut or tear off the excess
Press firmly to ensure the tape lies flat
Tighten the male end connection into the female end connection