Technical Document
Specifications
Brand
MolexConnector 1
QF-50 IDC
Ribbon Cable Type
Flat
Connector 2
QF-50 IDC
Connector 1 Gender
Female
Number of Ways
10
Connector 2 Gender
Female
Series
92321
Length
400mm
Sheath Colour
Grey
Size of Strands
7
Standards Met
UL 2651
Country of Origin
Poland
Product details
Molex 1.27mm QF-50 Single Beam IDC Ribbon Cable Connectors
1.27mm QF-50 IDC single beam vertical MIL/DIN version ribbon cable/wire trap female connectors with an upper housing pre-loaded with gold plated phosphor bronze IDC contacts. These QF-50 single beam ribbon cable/wire trap connectors are fully shrouded with a 90 degree cable entry angle and black UL94V-0 polyester housings which are fully polarized to ensure accurate mating. The mating pitch of these QF-50 single beam IDC ribbon cable connectors is 2.54mm, the termination interface is 1.27mm and accepts ribbon cable with a 26-28 AWG wire size.
Part numbers 92321-1xxx are QF-50 to QF-50 cable assemblies terminated by two female QF-50 connectors with a 28 AWG, 1.27mm pitch and a 7 strand ribbon cable. These QF-50 to QF-50 cable assemblies are available with a variety of connector sizes and ribbon cable lengths.
1.27mm Molex QF-50 Single Beam Ribbon Cable Connectors
Stock information temporarily unavailable.
Please check again later.
€ 4.79
Each (In a Pack of 2) (ex VAT)
€ 5.70
Each (In a Pack of 2) (inc VAT)
2
€ 4.79
Each (In a Pack of 2) (ex VAT)
€ 5.70
Each (In a Pack of 2) (inc VAT)
2
Technical Document
Specifications
Brand
MolexConnector 1
QF-50 IDC
Ribbon Cable Type
Flat
Connector 2
QF-50 IDC
Connector 1 Gender
Female
Number of Ways
10
Connector 2 Gender
Female
Series
92321
Length
400mm
Sheath Colour
Grey
Size of Strands
7
Standards Met
UL 2651
Country of Origin
Poland
Product details
Molex 1.27mm QF-50 Single Beam IDC Ribbon Cable Connectors
1.27mm QF-50 IDC single beam vertical MIL/DIN version ribbon cable/wire trap female connectors with an upper housing pre-loaded with gold plated phosphor bronze IDC contacts. These QF-50 single beam ribbon cable/wire trap connectors are fully shrouded with a 90 degree cable entry angle and black UL94V-0 polyester housings which are fully polarized to ensure accurate mating. The mating pitch of these QF-50 single beam IDC ribbon cable connectors is 2.54mm, the termination interface is 1.27mm and accepts ribbon cable with a 26-28 AWG wire size.
Part numbers 92321-1xxx are QF-50 to QF-50 cable assemblies terminated by two female QF-50 connectors with a 28 AWG, 1.27mm pitch and a 7 strand ribbon cable. These QF-50 to QF-50 cable assemblies are available with a variety of connector sizes and ribbon cable lengths.