Technical Document
Specifications
Dimensions (L x W x H)
94 x 94 x45mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
USB Version
USB2.0
Lifetime
2000h
Tolerance
±20%
Lead Pitch
12mm
Dissipation Factor
10%
Voltage
63V dc
Diameter
25mm
Length
44mm
Height
44mm
Ripple Current
2.2A
Capacitance
4700µF
Series
RS
Brand
RS ProDimensions
25 (Dia.) x 44mm
Country of Origin
Taiwan, Province Of China
Product details
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Works solely with the EL-WiFi range of sensors
Detects alarm triggers from all EL-WiFi sensors
Audible alarm with built-in speaker (SPL 100dBA @ 1m)
Flashing red LEDs light up through translucent red rear moulding
Functions at all times, including when PC turned off
Easy set-up using free PC software application
Configurable alert tones and volume
Auto mute
Signal strength indicator
Protection rating IP55
Firmware upgradeable via USB
Supported Security Protocols WEP, WPA/WPA2-PSK
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11
Stock information temporarily unavailable.
Please check again later.
€ 7.97
Each (In a Pack of 2) (ex VAT)
€ 9.484
Each (In a Pack of 2) (inc VAT)
Standard
2
![sticker-729](https://cms.rsdelivers.com/repository-v1/Cyprus Label.jpg)
€ 7.97
Each (In a Pack of 2) (ex VAT)
€ 9.484
Each (In a Pack of 2) (inc VAT)
Standard
2
![sticker-729](https://cms.rsdelivers.com/repository-v1/Cyprus Label.jpg)
Buy in bulk
quantity | Unit price | Per Pack |
---|---|---|
2 - 18 | € 7.97 | € 15.94 |
20 - 48 | € 7.51 | € 15.02 |
50 - 98 | € 7.06 | € 14.12 |
100+ | € 6.83 | € 13.66 |
Technical Document
Specifications
Dimensions (L x W x H)
94 x 94 x45mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
USB Version
USB2.0
Lifetime
2000h
Tolerance
±20%
Lead Pitch
12mm
Dissipation Factor
10%
Voltage
63V dc
Diameter
25mm
Length
44mm
Height
44mm
Ripple Current
2.2A
Capacitance
4700µF
Series
RS
Brand
RS ProDimensions
25 (Dia.) x 44mm
Country of Origin
Taiwan, Province Of China
Product details
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Works solely with the EL-WiFi range of sensors
Detects alarm triggers from all EL-WiFi sensors
Audible alarm with built-in speaker (SPL 100dBA @ 1m)
Flashing red LEDs light up through translucent red rear moulding
Functions at all times, including when PC turned off
Easy set-up using free PC software application
Configurable alert tones and volume
Auto mute
Signal strength indicator
Protection rating IP55
Firmware upgradeable via USB
Supported Security Protocols WEP, WPA/WPA2-PSK
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11